概要

Styles:
Full Duty: full length top 1913 Picatinny rail
Lightspeed: front/rear only 1913 Picatinny rail

Mission dictates gear. Specifically designed for Law Enforcement and Special Operations communities who have adopted the HK416/M27 IAR platform in the U.S. and all around the world. The Strike Industries GRIDLOK? Rail for 416 gives you a primary, a secondary or multiple setup options as a quick and direct handguard swap. The GRIDLOK? Rail for 416 has the SI patent pending Quick Rail Detach GRIDLOK? locking latch and mounts on using the factory HK OEM barrel nut, in seconds you can replace the HK standard rail with an outfitted GRIDLOK? as a primary handguard and use your HK rail as a secondary handguard. You can outfit and setup the GRIDLOK? as a secondary handguard for a specific mission or you can get multiple GRIDLOK? Rail’s in different lengths to configure for different missions. The GRIDLOK? Rail for 416 is available in four (x4) various lengths (9”/11”/14.5”/16”) and in full length top 1913 Picatinny rail (Full Duty) or front/rear Picatinny rail (Lightspeed) versions. The GRIDLOK? Rail for 416 takes innovation from the original GRIDLOK? rail but this is a 1-piece design to minimize weight and increase strength. There is no other HK416 handguard that can be removed in the field or at home as quick and easy on the market today. With the Quick Rail detach system, a simple push and pull of the of the quick detach (QD) latch, you have the handguard off in seconds to make any adjustments to an adjustable gas block or installation/removal of a suppressor easier. Law enforcement and military users can quickly swap between multiple GRIDLOK? rails for specific missions. Short and lightweight night vision ready for CQB house clearing to a bipod ready marksman rifle. Go from one mission to another without needing multiple weapons. Integrated into the front of the GRIDLOK? is the built-in flip up backup iron sight (BUIS). M-LOK accessories can be attached and mounted along the rail at 3, 6 and 9 o'clock positions. In the rear of the handguard you will find four (x4) integrated 360° free swivel QD socket at 2, 4 8 and 10 o’clock positions. The rear rail tab helps index into the HK upper receiver to center the top rail and ensure proper alignment. The cut in front was designed to help fit suppressors up to 1.57'' (39.9mm) in diameter and of course all SI muzzle devises including the SI OPPRESSOR line for those looking for that tucked look. The handguard is machined from 6061-T6 aluminum. The Strike Industries GRIDLOK? for 416 is lightweight, high-strength and everything you need and nothing you don’t.

COMPATIBILITY: HK416/HK416 A5/HK416 A7/MR556/M27 IAR (w/o ambidextrous sling attachment points)
NOT COMPATIBLE: HK416/HK MR556 with ambidextrous sling attachment points

NOTE: The two locking screw at base can only be easily adjusted when the base is not mounted on barrel nut. It is NOT RECOMMENDED to adjust the locking tightness when you mount it on barrel nut. Installation video available.

WARNING:
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy

NOTE: The two locking screw at base can only be easily adjusted when the base is not mounted on barrel nut. It is NOT RECOMMENDED to adjust the locking tightness when you mount it on barrel nut. Installation video available. Product Contents:
-x1 GRIDLOK? Rail for 416 (fully assembled)
-x1 Locking lever tool Product Features:
-Mounts quickly and directly on HK OEM barrel nut
-Patent Pending Quick Rail Detach GRIDLOK? locking latch
-Specifically designed for Law Enforcement and Special Operations communities
-Law Enforcement and military users can quickly swap rails for specific missions
-Quickly remove and reinstall rail
-1-pc free float handguard design to minimize weight and increase strength
-Built-in flip up front BackUp Iron Sight (BUIS)
-M-LOK rail system at 3, 6 and 9 o’clock positions for accessory mounting options
-Integrated 360° free swivel QD socket at rear of handguard at 2, 4, 8 and 10 o’clock positions
-Rear rail tab to help index into HK upper receiver
-Designed cut in front fits suppressors up to 1.57'' (39.9mm) in diameter and all SI muzzle devices, including SI OPPRESSOR
-Handguard machined from 6061-T6 aluminum COMPATIBILITY: HK416/HK416 A5/HK416 A7/MR556/M27 IAR (w/o ambidextrous sling attachment points)
NOT COMPATIBLE: HK416/HK MR556 with ambidextrous sling attachment points WARNING:
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

スペック