概要

100% avoid CANT, Designed for Real Fire Calibers & Long Range Shooting, 30mm Diameter w/ 1'' AdapterEasy to Use, Air Bubble Level, Angle Indicator on Side, Designed for Real Firearms, Full Metal, See-through

スペック

直径	30mm + 1'' adapter
全体の長さ	140mm (5.5 inch)
リングギャップ	55mm (2.1 inch)
リング幅	26mm (1.0 inch)
インジケーターの直径	30mm (1.2 inch)
重さ	180g (6.3 ounce)
仕上げ	マットブラック
Mount	21mm ピカティニー
	This ADI is calibrated in degrees and cosines give you an instant read out which can enter directly into ballistic software program on your pocket PC or use + a pre-printed angle drop chart to achieve high accurate shooting.
	The red needle moves + your rifle and displays a number that indicates the percent your rifle is off level. Multiply the indicated percent by the target distance to easily calculate the adjusted distance for gravity.
	The bubble level which can be flipped to the side also allows you to have an additional indicator to achieve much higher accuracy.
	Angle indicator and scope level support long range precision shooting
	Designed for real fire arms
	The bubble level can be put on either side
	30mm one piece mount skeletonized extra light
	See-through style
	Level and indicator were both center aligned during the assembling
	High quality 6063 T6 aircraft grade aluminum alloy
パッケージ内容	hex key, 25.4mm 1'' adapter
P.S
	1, If not satisfied + the angle indicator position, use the proper screwdriver to release the indicator screw and reset its position.
	2, If the bubble is not shown in the middle or is not vertical when it's on the left side, use proper screwdriver to adjust the tiny screw for different height.